Soluții

Review: Mercusys MR50G – AC1900 Dual Band Gigabit Router

Interfata 1x Gigabit WAN / 2x Gigabit LAN
Antene 6x antena omni-directionala fixa
Viteza 600Mbps @ 2.4GHz / 1300Mbps @ 5GHz
Tip WAN IP Dinamic, IP Static, PPPoE, PPTP, L2TP
Retea Guest Da, 2.4GHz + 5GHz
Standarde WiFi IEEE 802.11a/n/ac 5GHz, IEEE 802.11b/g/n/ac 2.4GHz
Securitate WiFi WPA-PSK, WPA2-PSK
Frecventa 2.4 – 2.5GHz, 5.15 – 5.25GHz
Protocoale IPv4, IPv6
Dimesniuni 175.6 x 157.2 x 45mm
[mai mult...]

Review: Kingston KC600 1TB SSD

Specificatii:

  • Tip SSD: Intern
  • Form Factor: 2.5″
  • Interfata: SATA-III
  • Capacitate: 1TB
  • Viteza citire: 550MB/s
  • Viteza scriere: 520MB/s
  • Random 4KB Citire: 90K IOPS max.
  • Random 4KB Scriere: 80K IOPS max.
  • Controller: Silicon Motion SM2259
  • MTBF (Mean Time Between Failures): 1.000.000 ore
  • TBW (Total Bytes Written): 600TB
  • Criptare Date: XTS-AES 256-bit
[mai mult...]

Cum schimbi poza unui grup in Microsoft Teams

Crearea si alaturarea unui grup in Microsoft Teams este usoara. Pe de alta parte, identificarea unui grup dintr-o lista lunga poate fi dificila. Puteti sa puneti o poza pentru fiecare grup pentru o identificare mai usora.

Pentru acest lucru trebuie sa urmati pasii de mai jos:

Pasul 1:

Dati click pe grupul pentru care doriti sa schimbati poza si apasati cele trei puncte orizontale.

Pasul 2

Dupa ce ati dat click va aparea o lista cu optiuni de unde va trebui sa alegeti ,,Manage team’’:

Pasul 3

Din lista de optiuni trebuie sa alegeti ,,Settings’’

Pasul 4

Dupa ce ati selectat ,,Settings”, apare un meniu cu noi optiuni, de aici trebuie sa alegeti prima optiune ,,Add a team picture’’

Pasul 5

Dupa ca ati ales ,,add a team picture’’ apare un nou meniu cu ,,Change picture’’

Pasul 6

Acum prin optiunea ,,Upload picture’’ trebuie sa alegeti ce fotografie doriti din PC-ul dumneavoastra.

Pasul 7

Dupa ce ati ales poza dorita grupului, va trebui sa dati ,,Save’’:

Dupa ce ati salvat poza, aceasta se va modifica automat. Puteti repeta procedura pentru fiecare grup in parte astfel incat sa va fie mai usor sa le identificati.

[mai mult...]

How to Turn On HTTPS-Only Mode in Mozilla Firefox

Mozilla Firefox’s HTTPS-Only Mode provides extra privacy and security online. With it enabled, Firefox will try hard to only load encrypted HTTPS websites. If only HTTP is available, Firefox won’t load the unencrypted website without asking you.

The secure protocol HTTPS is the bedrock method of maintaining privacy and security on the web. It sets up an encrypted connection between your browser and the web server that prevents third parties from eavesdropping on or tampering with the data being sent between you and the site you’re browsing. Unfortunately, not all sites support HTTPS, and some that do may fall back to non-encrypted HTTP versions of a site if you visit them through an HTTP link (such as http://www.example.com instead of https://www.example.com—notice the missing “s” in the address).

Starting in Mozilla Firefox version 83, which was released on November 16, 2020, you can turn on HTTPS-Only Mode. Firefox will automatically attempt to load the HTTPS version of a website even if you visit the site through a link to an unencrypted HTTP address. If one isn’t available, you’ll have to provide explicit permission before Firefox will load an HTTP page. Here’s how to enable this option.

[mai mult...]